Ce site utilise des cookies. En poursuivant la navigation sur ce site, vous acceptez l’utilisation de cookies.
OK
Schuco Dickie ToysMajoretteCarsonBIG 
Boutique  officielle  du  fabricant

New Product

Its dimensions alone make the Kirovets K-700 all,wheel drive tractor something special at every tractor meeting and, of course, in every tractor collection. Developed from the end of the 50s by the Russian manufacturer, Kirovets, the first prototype of the K-700 left the factory gates in Leningrad in July 1962. Between 1962 and 1975, well over 100,000 K-700s were produced. With an 8-cylinder diesel engine, developing 215 hp, sand centre-pivot steering, from 1968, the numbers exported to the GDR were also not insignificant. Known for its extreme reliability and very efficient, especially on large agricultural areas, using a K-700 could triple productivity compared with the Fortschritt ZT 300. However, to be able to make the best, economical use of a Kirovets K-700 in the state-controlled agriculture of the GDR, separate fields had to be joined up to form large acreages. It was also calculated that a K-700 had to be worked for at least 1400 hours per year to be profitable. Since this was impossible with single-shift working, a two-shift system was introduced for agricultural production collectives equipped with the K-700. Schuco presents the Kirovets K-700 M with front loader as a high-quality metal miniature with functioning front loader in the popular 1:32 scale. The Schuco Edition 1:32 is highly impressive due to its very detailed and precise finish. The tractor has functioning steering and is without doubt a must-have in every tractor collection.   Attention ! Ne convient pas aux enfants de moins de 14 ans.
€89.95
TVA incluse, plus Frais d'expédition

New Product

With the 9 Series, DEUTZ-FAHR engineers have developed an ultra-modern, highly intelligent tractor. Thanks to its uniquely intuitive operating system, automated routine functions and highly innovative technologies, it increases work efficiency while consuming minimal resources. Sporting a highly efficient 312 hp engine, continuously variable TTV transmission for precise speeds of 0.2 to 60 km/h at reduced engine speed and a wide range of innovative features, the Deutz-Fahr 9310 TTV Agroton is an ultra-modern and highly efficient tractor. Its modern design was developed in close collaboration with Italdesign Giugiaro and is reproduced in our intricately detailed 1:32 metal replica.   Attention ! Ne convient pas aux enfants de moins de 14 ans.
€84.95
TVA incluse, plus Frais d'expédition

New Product

Always at the ready, extremely wear-resistant and highly economical. These were the attributes with which Klöckner-Humboldt-Deutz AG publicised the 50-hp, type Deutz F3 M417 universal tractor in Cologne-Deutz. Also known as the „Deutz steel tractor“, the F3 was built between 1942 and 1953 as a versatile, universal and road tractor. This all-rounder was supplied as standard with a belt pulley and a power take off shaft. Its simple and robust construction made the F3 M417 very durable and technically reliable, it continued almost unchanged in production from the end of the War and was still in use as a road tractor until the end of the 70s. Schuco presents the Deutz F3 tractor as a high-quality metal miniature with top and trailer in the popular 1:32 scale. The Schuco Edition 1:32 is highly impressive due to its very detailed and precise finish. The tractor has functioning steering and is without doubt a must-have in every tractor collection.   Attention ! Ne convient pas aux enfants de moins de 14 ans.
€129.95
TVA incluse, plus Frais d'expédition

Case International 633, 1:32

With significantly more than 31,000 manufactured examples, the Case 633 was a real best-seller in the Case tractor product range in the 1970s and 1980s, and the Case IH tractor product range from 1984 onwards. Case took over the agricultural machinery product range of International Harvester (IH) in 1984 and subsequently traded as Case-IH. The 633 model was available with rear wheel drive and 4-wheel drive, and belonged to the so-called Case IH A-range. Its 3 litre 3-cylinder engine provided 52 BHP and made it possible for this standard tractor to travel at speeds of 25 or 30 km/h. Schuco presents the CASE International 633 as a high-quality metal miniature in the popular 1:32 scale. The Schuco Edition 1:32 is highly impressive due to its very detailed and precise finish. The tractor has functioning steering and is without doubt a must-have in every tractor collection.   Attention ! Ne convient pas aux enfants de moins de 14 ans.
€64.95
TVA incluse, plus Frais d'expédition

DEUTZ FAHR 9340 TTV

With the series 9, the DEUTZ-FAHR engineers have developed an ultra-modern, highly intelligent large tractor which makes all work easier and also speeds it up thanks to the unique operating convenience, automated routine functions and extremely advanced technologies - and all of this with the lowest conceivable consumption of resources. The ultra-modern Deutz Fahr 9340 TTV is a large tractor with which farmers and agricultural contractors can achieve the best results. It leaves nothing to be desired with regard to its engine power with its water-cooled Deutz-TTCD 6-cylinder engine with 7.8 litres and output of 336 BHP. Schuco presents the Deutz-Fahr 9340 TTV as a high-quality metal miniature in the popular 1:32 scale. The Schuco Edition 1:32 is highly impressive due to its very detailed and precise finish. The tractor has functioning steering and is without doubt a must-have in every tractor collection.   Attention ! Ne convient pas aux enfants de moins de 14 ans.
€74.95
TVA incluse, plus Frais d'expédition

International 433, red 1:32

When it was introduced in 1975 by IHC (International Harvester Company), the IHC 433 was the smallest model in the so-called IHC-A model series. Power-wise the tractor is the successor to the IHC 383. After IHC was taken over by Case, the IHC 433 was known as the Case IH 433 with a different colour scheme from 1985 onwards. The 433 model was built in the factories in Neuss and St. Dizier (France), like its predecessor. When production was discontinued in Neuss in the spring of 1990, production of model 433 continued in Doncaster (England) until March 1993, whereby the model designation changed to Case-IH 440. Schuco presents the International 433 with safety bar as a high-quality metal miniature in the popular 1:32 scale. The Schuco Edition 1:32 is highly impressive due to its very detailed and precise finish. The tractor has functioning steering and is without doubt a must-have in every tractor collection.   Attention ! Ne convient pas aux enfants de moins de 14 ans.
€59.95
TVA incluse, plus Frais d'expédition

John Deere 1270G 6W 1:32

The John Deere 1270G-series harvester is represented by two different forestry machine models in the Schuco 1:32 Edition – the John Deere 1270G 6-wheel and the 1270G 8-wheel versions. Both harvesters are characterised by exceptional efficiency, versatility and extremely high productivity. Both the 6-wheel and 8-wheel harvesters are powered by a John Deere PowerTech Plus diesel engine – a 6-cylinder, 9-litre turbocharged unit that produces a massive 1,315 Nm of torque.   Attention ! Ne convient pas aux enfants de moins de 14 ans.
€99.95
TVA incluse, plus Frais d'expédition

New Product

To counter the fall in sales of the Mercedes-Benz Unimog in the agricultural market in the mid-60s, Daimler-Benz decided, in 1967, to develop its own range of tractors on the basis of existing Unimog component units. The result of these efforts was the MB Trac 65/70, presented in 1972, where the 65/70 designation stood for 65 DIN or 70 SAE-hp. Produced until 1991, the MB Trac 1800 Intercooler represented the absolute flagship of the range. 190 of this 180-hp vehicle, equipped with a 6-litre, six-cylinder diesel engine, were produced in the Unimog factory in Gaggenau. Schuco presents the Mercedes-Benz Trac 1800 as a high-quality metal miniature in the popular 1:32 scale. The Schuco Edition 1:32 is highly impressive due to its very detailed and precise finish. The tractor has functioning steering and is without doubt a must-have in every tractor collection.   Attention ! Ne convient pas aux enfants de moins de 14 ans.
€69.95
TVA incluse, plus Frais d'expédition

New Product

As early as 1898, in Freising near Munich, Anton Schlüter founded his Schlüter Motorenwerke. In 1937, seeking to take a share in the increasingly lucrative agricultural tractor market of the 1930s, Schlüter presented the Schlüter DZM 25, its first tractor. From 1964, the company in Freising concentrated on the production of large tractors and thus lived up to the Schlüter advertising slogan: „All the power that you need“. Between 1984 and 1989, the company built just 12 of the Schlüter Super Trac 2500 VL, so that this vehicle is now a sought-after classic and draws attention at any tractor meeting. Schuco presents the Schlüter Super Trac 2500 VL as a high-quality metal miniature with functioning front loader in the popular 1:32 scale. The Schuco Edition 1:32 is highly impressive due to its very detailed and precise finish. The tractor has functioning steering and is without doubt a must-have in every tractor collection.   Attention ! Ne convient pas aux enfants de moins de 14 ans.
€79.95
TVA incluse, plus Frais d'expédition

New Product

Today, just as in the past, we cannot imagine modern agriculture without them – tractors. Schuco has brought together three particularly legendary tractors in a high quality gift set. The Eicher 3125, the Schlüter Compact 1250 TV6 and the IHC (International Harvester Company) 1255 XL are dispatched together in a quality wooden gift case. The worldwide issue of this gift set runs to 500.   Attention ! Ne convient pas aux enfants de moins de 14 ans.
€199.95
TVA incluse, plus Frais d'expédition

New Product

From 1982, the Deutz DX 250 was built by Klöckner-Humbold-Deutz (KHD) primarily for export. This large tractor was the successor to the Deutz DX 230. When the DX 250 was developed in Cologne-Deutz, the company had a particular eye on the American market because it seemed to be there that the market for tractors beyond the 200 hp threshold was greatest. However, the desired sales numbers were never reached, so the production of the DX 250 was stopped as early as 1984. The engine used was the 220-hp Deutz BF6L 413 FR with 6 cylinders and a displacement of 9572 cc. The top speed of the DX 250, weighing in at 9250 kg unladen, was about 30 km/h (19 mph). Schuco presents the Deutz DX 250 tractor as a high-quality metal miniature in the popular 1:32 scale. The Schuco Edition 1:32 is highly impressive due to its very detailed and precise finish. The tractor has functioning steering and is without doubt a must-have in every tractor collection.   Attention ! Ne convient pas aux enfants de moins de 14 ans.
€79.95
TVA incluse, plus Frais d'expédition

New Product

Founded in the 19th century, Heinrich Lanz AG in Mannheim very quickly developed into one of Germany‘s leading agricultural machinery manufacturers. From the 1920s, the Mannheim company went into the production of farm tractors and thus played a significant part in the motorisation of German agriculture. Under the name of Lanz Bulldog, farm tractors with a single-cylinder, glow-plug engine were produced with great success. These tractors made such an impression that the name Bulldog became widely used in Germany as a colloquial expression for farm tractors in general. During the 30s, Lanz achieved a market share of 50% in Germany and more than half its production was exported. The very finely detailed Schuco model to a scale of 1:32 depicts a Lanz Bulldog D 9506, one of Lanz‘ most successful models. Almost unchanged from 1936 to 1955, it was produced with a single-cylinder engine, legendary for its displacement of just over 10 litres and delivering 45 hp. Schuco presents the Lanz D9506 with manure trailer (laser cut) as a high-quality metal miniature in the popular 1:32 scale. The Schuco Edition 1:32 is highly impressive due to its very detailed and precise finish. The tractor has functioning steering and is without doubt a must-have in every tractor collection.   Attention ! Ne convient pas aux enfants de moins de 14 ans.
€119.95
TVA incluse, plus Frais d'expédition

New Product

Founded in the 19th century, Heinrich Lanz AG in Mannheim very quickly developed into one of Germany‘s leading agricultural machinery manufacturers. From the 1920s, the Mannheim company went into the production of farm tractors and thus played a significant part in the motorisation of German agriculture. Under the name of Lanz Bulldog, farm tractors with a single-cylinder, glow-plug engine were produced with great success. These tractors made such an impression that the name Bulldog became widely used in Germany as a colloquial expression for farm tractors in general. During the 30s, Lanz achieved a market share of 50% in Germany and more than half its production was exported. The very finely detailed Schuco model to a scale of 1:32 depicts a Lanz Bulldog D 9506, one of Lanz‘ most successful models. Almost unchanged from 1936 to 1955, it was produced with a single-cylinder engine, legendary for its displacement of just over 10 litres and delivering 45 hp. Schuco presents the Lanz D9506 with manure trailer (laser cut) as a high-quality metal miniature in the popular 1:32 scale. The Schuco Edition 1:32 is highly impressive due to its very detailed and precise finish. The tractor has functioning steering and is without doubt a must-have in every tractor collection.   Attention ! Ne convient pas aux enfants de moins de 14 ans.
€119.95
TVA incluse, plus Frais d'expédition

New Product

Founded in the 19th century, Heinrich Lanz AG in Mannheim very quickly developed into one of Germany‘s leading agricultural machinery manufacturers. From the 1920s, the Mannheim company went into the production of farm tractors and thus played a significant part in the motorisation of German agriculture. Under the name of Lanz Bulldog, farm tractors with a single-cylinder, glow-plug engine were produced with great success. These tractors made such an impression that the name Bulldog became widely used in Germany as a colloquial expression for farm tractors in general. During the 30s, Lanz achieved a market share of 50% in Germany and more than half its production was exported. The very finely detailed Schuco model to a scale of 1:32 depicts a Lanz Bulldog D 9506, one of Lanz‘ most successful models. Almost unchanged from 1936 to 1955, it was produced with a single-cylinder engine, legendary for its displacement of just over 10 litres and delivering 45 hp. The Lanz tractor can be hitched to the newly developed, wooden, ladder-sided cart or the Dechentreiter threshing machine. Both make a fine piece of agricultural history in miniature.   Attention ! Ne convient pas aux enfants de moins de 14 ans.
€89.95
TVA incluse, plus Frais d'expédition

New Product

On their Lanz-Bulldog, Santa and his helper, the reindeer, carry the Christmas presents to their anxiously waiting recipients. That is the theme of this year‘s Schuco Christmas model of the 1:32 edition. The lovingly hand-painted figures and presents make the Lanz with caterpillar attachment a sought-after and rare collector‘s piece.   Attention ! Ne convient pas aux enfants de moins de 14 ans.
€119.95
TVA incluse, plus Frais d'expédition

New Product

Its dimensions alone make the Kirovets K-700 all,wheel drive tractor something special at every tractor meeting and, of course, in every tractor collection. Developed from the end of the 50s by the Russian manufacturer, Kirovets, the first prototype of the K-700 left the factory gates in Leningrad in July 1962. Between 1962 and 1975, well over 100,000 K-700s were produced. With an 8-cylinder diesel engine, developing 215 hp, sand centre-pivot steering, from 1968, the numbers exported to the GDR were also not insignificant. Known for its extreme reliability and very efficient, especially on large agricultural areas, using a K-700 could triple productivity compared with the Fortschritt ZT 300. However, to be able to make the best, economical use of a Kirovets K-700 in the state-controlled agriculture of the GDR, separate fields had to be joined up to form large acreages. It was also calculated that a K-700 had to be worked for at least 1400 hours per year to be profitable. Since this was impossible with single-shift working, a two-shift system was introduced for agricultural production collectives equipped with the K-700. Schuco presents the Kirovets K-700 T tractor as a high-quality metal miniature with functioning front loader in the popular 1:32 scale. The Schuco Edition 1:32 is highly impressive due to its very detailed and precise finish. The tractor has functioning steering and is without doubt a must-have in every tractor collection.   Attention ! Ne convient pas aux enfants de moins de 14 ans.
€89.95
TVA incluse, plus Frais d'expédition

New Product

Originally developed as an „Universal-Motor-Gerät“, the Unimog was, to begin with, intended exclusively for use in agriculture. Mass produced from 1949, this true jack of all trades was very quickly adopted in agriculture, forestry, in the military field and for local authority tasks. Initially produced at Boehringer GmbH in Göppingen, production was transferred to Gaggenau in 1951. Since 2002, the Unimog range has been manufactured in the Daimler-Benz utility vehicle factory in Wörth. Equipped with numerous functions, the Schuco metal model to a scale of 1:32 represents a Mercedes-Benz Unimog 1600 that, with its rather angular design, was introduced in 1974.   Attention ! Ne convient pas aux enfants de moins de 14 ans.
€64.95
TVA incluse, plus Frais d'expédition

New Product

The John Deere 1270G-series harvester is represented by two different forestry machine models in the Schuco 1:32 Edition – the John Deere 1270G 6-wheel and the 1270G 8-wheel versions. Both harvesters are characterised by exceptional efficiency, versatility and extremely high productivity. Both the 6-wheel and 8-wheel harvesters are powered by a John Deere PowerTech Plus diesel engine – a 6-cylinder, 9-litre turbocharged unit that produces a massive 1,315 Nm of torque.   Attention ! Ne convient pas aux enfants de moins de 14 ans.
€119.95
TVA incluse, plus Frais d'expédition

New Product

The flagship of Aschaffenburg-based tractor manufacturer Güldner, the Güldner G75, was also available with 4-wheel drive from 1965 onwards. The Güldner G-75 A (the “A” in the product designation stood for 4-wheel drive) had 5 BHP more power than its rear-wheel drive sibling, the G-75. With its 4.7 litre 6-cylinder inline diesel engine and 75 PS, exactly 201 examples of the G-75A were manufactured between 1965 and 1969. The 1:32 scale Schuco collector’s model is pulling a typical circus carriage, which was popular during the 1950’s and 1960’s.   Attention ! Ne convient pas aux enfants de moins de 14 ans.
€159.95
TVA incluse, plus Frais d'expédition

New Product

Güldner-Motoren-Werke AG, a manufacturer of diesel engines and tractors, was founded in 1904 by Hugo Güldner, Carl von Linde and Georg von Krauß as Güldner-Motoren-Gesellschaft GmbH. The first tractor was presented in 1936 and it simultaneously marked the start of full-scale tractor production at Güldner. The 60 bhp Güldner G 60 with four-wheel drive hit the market in 1968. Schuco presents the Güldner G60A tractor as a high-quality metal miniature with roof and functioning front loader in the popular 1:32 scale. The Schuco Edition 1:32 is highly impressive due to its very detailed and precise finish. The tractor has functioning steering and is without doubt a must-have in every tractor collection.   Attention ! Ne convient pas aux enfants de moins de 14 ans.
€89.95
TVA incluse, plus Frais d'expédition

New Product

The Hanomag Robust 900 tractor was the largest and most powerful Hanomag tractor ever made and was produced from 1967 to 1970. The basic difference between the Robust 900 and the Brillant 701 was its larger and more powerful engine, which was capable of 85 bhp. Schuco presents this typical Sixties tractor as a high-quality metal miniature with functioning front loader in the popular 1:32 scale. The Schuco Edition 1:32 is highly impressive due to its very detailed and precise finish. The tractor has functioning steering and is without doubt a must-have in every tractor collection.   Attention ! Ne convient pas aux enfants de moins de 14 ans.
€89.95
TVA incluse, plus Frais d'expédition

New Product

The Hanomag Robust 900 tractor was the largest and most powerful Hanomag tractor ever made and was produced from 1967 to 1970. The basic difference between the Robust 900 and the Brillant 701 was its larger and more powerful engine, which was capable of 85 bhp.The 1:32 scale Schuco collector’s model is pulling a typical circus carriage, which was popular during the 1950’s and 1960’s.   Attention ! Ne convient pas aux enfants de moins de 14 ans.
€159.95
TVA incluse, plus Frais d'expédition

New Product

The Fendt 211 Vario is the most powerful and compact standard tractor in the extensive range of Fendt tractors. Depending on the usage area, the Fendt 200 Vario provides the correct functions for all challenges in grassland, in Alpine areas, in agriculture, during transport, during maintenance work, in special cultures, during municipal work and also as a farm tractor. With its maximum output of 111 PS from its 3.3 litre 3-cylinder engine, it is perfect for any job. The Fendt 211 V Vario is a classic narrow gauge tractor which has been specially developed for use in vineyards with its compact width starting at 1.07 metres. The V in the type designation stands for the first letter of the English term for wine – Vine. Schuco presents the Fendt 211 Vario as a high-quality metal miniature in the popular 1:32 scale. The Schuco Edition 1:32 is highly impressive due to its very detailed and precise finish. The tractor has functioning steering and is without doubt a must-have in every tractor collection.   Attention ! Ne convient pas aux enfants de moins de 14 ans.
€69.95
TVA incluse, plus Frais d'expédition

New Product

Always at the ready, extremely wear-resistant and highly economical. These were the attributes with which Klöckner-Humboldt-Deutz AG publicised the 50-hp, type Deutz F3 M417 universal tractor in Cologne-Deutz. Also known as the „Deutz steel tractor“, the F3 was built between 1942 and 1953 as a versatile, universal and road tractor. This all-rounder was supplied as standard with a belt pulley and a power take off shaft. Its simple and robust construction made the F3 M417 very durable and technically reliable, it continued almost unchanged in production from the end of the War and was still in use as a road tractor until the end of the 70s. Schuco presents the Deutz F3 tractor as a high-quality metal miniature with top and trailer in the popular 1:32 scale. The Schuco Edition 1:32 is highly impressive due to its very detailed and precise finish. The tractor has functioning steering and is without doubt a must-have in every tractor collection.   Attention ! Ne convient pas aux enfants de moins de 14 ans.
€89.95
TVA incluse, plus Frais d'expédition

New Product

Always at the ready, extremely wear-resistant and highly economical. These were the attributes with which Klöckner-Humboldt-Deutz AG publicised the 50-hp, type Deutz F3 M417 universal tractor in Cologne-Deutz. Also known as the „Deutz steel tractor“, the F3 was built between 1942 and 1953 as a versatile, universal and road tractor. This all-rounder was supplied as standard with a belt pulley and a power take off shaft. Its simple and robust construction made the F3 M417 very durable and technically reliable, it continued almost unchanged in production from the end of the War and was still in use as a road tractor until the end of the 70s. Schuco presents the Deutz F3 tractor with hay trailer as a high-quality metal miniature in the popular 1:32 scale. The Schuco Edition 1:32 is highly impressive due to its very detailed and precise finish. The tractor has functioning steering and is without doubt a must-have in every tractor collection.   Attention ! Ne convient pas aux enfants de moins de 14 ans.
€64.95
TVA incluse, plus Frais d'expédition

New Product

The „Universal tractor for large agricultural and forestry businesses“. This is how Deutz advertised for the Deutz F4L 514 in Cologne-Deutz from 1952 onwards. With its 5322 ccm, air-cooled four-cylinder diesel engine and output of 47.5 PS, the Deutz F4L 514 was also the most powerful model that Deutz had to offer in its range of tractors until the mid-1950s. During its entire construction period from 1952 to 1965, more than 7800 examples of the F4L 514 were produced in Cologne-Deutz and delivered to satisfied customers. Schuco presents the Deutz F4 L 514 as a high-quality metal miniature in the popular 1:32 scale. The Schuco Edition 1:32 is highly impressive due to its very detailed and precise finish. The tractor has functioning steering and is without doubt a must-have in every tractor collection.   Attention ! Ne convient pas aux enfants de moins de 14 ans.
€64.95
TVA incluse, plus Frais d'expédition

New Product

At the end of the 70s a start had already been made in the Fortschritt Landmaschinen collective combine on plans for the successor to the very successful ZT 300 series. Because of the outst5anding basis represented by the ZT 303 and ZT 323 models, the 320 series was not to be a purely new development but rather an extensive and well thought-out upgrade of the existing models. Given that, when presented, the basic model of the new series, the ZT 320, was already technically out-of-date because it lacked all-wheel drive, the publicly owned company Traktorenwerk Schönebeck very quickly concentrated on production of the ZT 323. As a part of the upgrade, this was, in terms of fuel consumption, significantly more efficient than the ZT 303 and thus able to build on the sales success of the latter. Schuco presents the Fortschritt ZT 323 tractor as a high-quality metal miniature in the popular 1:32 scale. The Schuco Edition 1:32 is highly impressive due to its very detailed and precise finish. The tractor has functioning steering and is without doubt a must-have in every tractor collection.   Attention ! Ne convient pas aux enfants de moins de 14 ans.
€64.95
TVA incluse, plus Frais d'expédition

New Product

The model RS09 Fortschritt equipment carrier was the most important working device by far in the LPG’s (agricultural collectives) and the VEG’s (nationally owned properties) in the former German Democratic Republic. This even went so far that even the architecture of the stable building in the GDR was adapted to the gauge, height and turning circle of this device. The RS09 (RS = wheeled tractor) tractor and equipment carrier was introduced in 1955, was also known under the product name of GT124 Maulwurf (Maulwurf = mole / GT = Carrier). Because of the large quantity that was produced, the “Mole” was one of the best-selling tractors in the DDR and the entire eastern block. Schuco presents the Fortschritt RS09-GT124 pick-up as a high-quality metal miniature in the popular 1:32 scale. The Schuco Edition 1:32 is highly impressive due to its very detailed and precise finish. The tractor has functioning steering and is without doubt a must-have in every tractor collection.   Attention ! Ne convient pas aux enfants de moins de 14 ans.
€84.95
TVA incluse, plus Frais d'expédition

New Product

The model RS09 Fortschritt equipment carrier was the most important working device by far in the LPG’s (agricultural collectives) and the VEG’s (nationally owned properties) in the former German Democratic Republic. This even went so far that even the architecture of the stable building in the GDR was adapted to the gauge, height and turning circle of this device. The RS09 (RS = wheeled tractor) tractor and equipment carrier was introduced in 1955, was also known under the product name of GT124 Maulwurf (Maulwurf = mole / GT = Carrier). Because of the large quantity that was produced, the “Mole” was one of the best-selling tractors in the DDR and the entire eastern block. Schuco presents the Fortschritt RS09-GT124 with cuttor bar as a high-quality metal miniature in the popular 1:32 scale. The Schuco Edition 1:32 is highly impressive due to its very detailed and precise finish. The tractor has functioning steering and is without doubt a must-have in every tractor collection.   Attention ! Ne convient pas aux enfants de moins de 14 ans.
€84.95
TVA incluse, plus Frais d'expédition

New Product

Founded in 1837 by the farrier, John Deere, in the US state of Illinois, Deere & Company, with its leading brand „John Deere“, is today the world leader in the field of agricultural technology. Shortly after the end of the 1st World War, Deere & Company started production of the first tractor models. During the world economic crisis, from 1931 to 1933, the company did not insist on repayments due from insolvent farmers. This generosity was later rewarded with many new customers and long-lasting customer loyalty. The John Deere 4850 on which our Schuco model is based was, from 1983 to 1988, a part of John Deere‘s 50 series. Driven by a 7630-cm3, 6-cylinder diesel engine, the 4850 delivered a maximum torque of 875 Nm.   Attention ! Ne convient pas aux enfants de moins de 14 ans.
€84.95
TVA incluse, plus Frais d'expédition

New Product

Produced from 1989 to 1992, the John Deere 4955 was John Deere’s top-of-the-range 55-series model. The 4955 belonged to the wide-frame range of models, which differed only in terms of their engine output. Featuring a 7634 cm3 in-line 6-cylinder engine, the John Deere 4955 could deliver 230 hp. It weighed 8332 kilograms and had an impressive maximum permissible gross laden weight of 12 tonnes.   Attention ! Ne convient pas aux enfants de moins de 14 ans.
€79.95
TVA incluse, plus Frais d'expédition

New Product

Featuring a 100 hp engine, the John Deere 6400 was the most powerful model in the hugely popular John Deere 6000 series from the 1990s. However, the bestselling model in the series was the John Deere 6300, which had a 3920 cm3 4-cylinder diesel engine with an output of 90 hp. Built between 1992 and 1997, the 6300 had an unladen weight of 3750 kg and maximum permission gross laden weight of 7500 kg. The 1:32 edition Schuco metal model features an additional moveable front loader.   Attention ! Ne convient pas aux enfants de moins de 14 ans.
€84.95
TVA incluse, plus Frais d'expédition

New Product

The John Deere 7610 is a 140 hp standard tractor from the John Deere 7010 range. It was built between 1997 and 2002. Optically, it looked very similar to its predecessor. However, John Deere’s engineers invested a significant amount of time in technical upgrades to the new range. The John Deere 7610’s 6.8 litre, 6-cylinder in-line engine could deliver 140 hp at a rated speed of 2100 rpm. It had an unladen weight of 6193 kg and maximum permissible gross laden weight of 11,500 kg.   Attention ! Ne convient pas aux enfants de moins de 14 ans.
€79.95
TVA incluse, plus Frais d'expédition

New Product

Fuchs was founded by the blacksmith Johannes Fuchs in 1888 To begin with, the company specialized in the production of agricultural machines and barn equipment. After the end of the Second World War, Fuchs started to manufacture excavators and cranes at its factory in Ditzingen in response to the huge demand for such machines created by postwar reconstruction efforts. Over 15,000 Fuchs Bagger 301 vehicles were produced following the start of production in 1957. Today, the company belongs to the American TEREX group. This intricately detailed Schuco metal model of the Fuchs Bagger 301 features a lattice boom as well as an interchangeable scrap grapple and wrecking ball.   Attention ! Ne convient pas aux enfants de moins de 14 ans.
€74.95
TVA incluse, plus Frais d'expédition

New Product

When it was introduced in 1975 by IHC (International Harvester Company), the IHC 433 was the smallest model in the so-called IHC-A model series. Power-wise the tractor is the successor to the IHC 383. After IHC was taken over by Case, the IHC 433 was known as the Case IH 433 with a different colour scheme from 1985 onwards. The 433 model was built in the factories in Neuss and St. Dizier (France), like its predecessor. When production was discontinued in Neuss in the spring of 1990, production of model 433 continued in Doncaster (England) until March 1993, whereby the model designation changed to Case-IH 440.   Attention ! Ne convient pas aux enfants de moins de 14 ans.
€79.95
TVA incluse, plus Frais d'expédition

New Product

The International 1255 is another cult youngtimer on the tractor scene. Launched in 1979, just over 1400 vehicles in this series were produced before production was discontinued in 1992. Its IH 6-cylinder four-stroke engine has a capacity of 5.9 litres that delivers a continuous output of 125 hp. It also features a direct fuel injection system and a turbocharger. Weighing 5550 kilograms, the 1255 has maximum permissible gross laden weight of 7 tonnes. From 1983, only export versions were produced without a cabin. The intricately detailed 1:32 Schuco model is a replica of the 1979 to 1983 version of the International 1255.   Attention ! Ne convient pas aux enfants de moins de 14 ans.
€59.95
TVA incluse, plus Frais d'expédition

New Product

Most tractors are unremarkable pieces of heavy equipment. Only a few tractors manage to achieve legendary status. The Fendt Favorit 626 LS is undoubtedly once such legend. Built between 1981 and 1985, this Fendt heavy tractor was a versatile and extremely powerful mulit-purpose machine. Fendt only produced 66 vehicles of the 626 LS model, which was equipped with a 252 hp, 11.4 litre MAN 6-cylinder diesel engine with a newly developed ZF transmission featuring 18 forwards and 6 reverse gears on the front and rear axle. Its transaxle design provided 50:50 weight distribution on the front and rear axle and helped the 626 LS to achieve maximum traction.   Attention ! Ne convient pas aux enfants de moins de 14 ans.
€69.95
TVA incluse, plus Frais d'expédition

New Product

In the 1960s, Fortschritt became East Germany’s largest manufacturer of agricultural equipment. From 1978, Fortschritt merged with a number of state-owned enterprises specializing in the production of agricultural and food machines. One such state-owned enterprise was the ErnstGrube motor vehicle plant in Werdau. The Fortschritt HW 80 – a 2-sided tipping trailer – was one of the most famous models produced in the Werdau factory. The trailer was specifically designed for agricultural use and is still in use on many farms today. It has a permissible payload of 8550 kg. Side extensions are often used to achieve the maximum load volume of 11 cubic metres. The contents of the Fortschritt HW80’s trailer can be unloaded hydraulically by the towing vehicle. The tipping side must be selected using a plug on the trailer. The maximum tipping angle is 50°, which ensures that the contents can be fully unloaded. The trailer can be fitted with a chaff container to transport goods with a very low density.   Attention ! Ne convient pas aux enfants de moins de 14 ans.
€64.95
TVA incluse, plus Frais d'expédition

New Product

In the 1960s, Fortschritt became East Germany’s largest manufacturer of agricultural equipment. From 1978, Fortschritt merged with a number of state-owned enterprises specializing in the production of agricultural and food machines. One such state-owned enterprise was the ErnstGrube motor vehicle plant in Werdau. The Fortschritt HW 80 – a 2-sided tipping trailer – was one of the most famous models produced in the Werdau factory. The trailer was specifically designed for agricultural use and is still in use on many farms today. It has a permissible payload of 8550 kg. Side extensions are often used to achieve the maximum load volume of 11 cubic metres. The contents of the Fortschritt HW80’s trailer can be unloaded hydraulically by the towing vehicle. The tipping side must be selected using a plug on the trailer. The maximum tipping angle is 50°, which ensures that the contents can be fully unloaded. The trailer can be fitted with a chaff container to transport goods with a very low density.   Attention ! Ne convient pas aux enfants de moins de 14 ans.
€59.95
TVA incluse, plus Frais d'expédition

New Product

Founded in the 19th century, Heinrich Lanz AG in Mannheim very quickly developed into one of Germany‘s leading agricultural machinery manufacturers. From the 1920s, the Mannheim company went into the production of farm tractors and thus played a significant part in the motorisation of German agriculture. Under the name of Lanz Bulldog, farm tractors with a single-cylinder, glow-plug engine were produced with great success. These tractors made such an impression that the name Bulldog became widely used in Germany as a colloquial expression for farm tractors in general. During the 30s, Lanz achieved a market share of 50% in Germany and more than half its production was exported. The very finely detailed Schuco model to a scale of 1:32 depicts a Lanz Bulldog D 9506, one of Lanz‘ most successful models. Almost unchanged from 1936 to 1955, it was produced with a single-cylinder engine, legendary for its displacement of just over 10 litres and delivering 45 hp.   Attention ! Ne convient pas aux enfants de moins de 14 ans.
€59.95
TVA incluse, plus Frais d'expédition

New Product

Built by Deutz between 1986 and 1991, the Deutz IN-trac 6.60 Turbo was based on the Deutz DX 6.50. Featuring a 150 hp, 6.1 litre 6-cylinder diesel direct injection engine with an exhaust gas turbocharger, the Intrac 6.60 Turbo was the most powerful model in Deutz-Fahr’s second generation of Intrac vehicles. The BF6L 913 type engine and the transmission were developed in-house by Deutz. With an unladen weight of 6300 kg and a maximum permissible gross laden weight of 10 tonnes, the heavy tractor is now a regular on the tractor youngtimer scene.   Attention ! Ne convient pas aux enfants de moins de 14 ans.
€74.95
TVA incluse, plus Frais d'expédition
Informations relatives à l'expédition

Si vous avez mis cet article dans le panier, l'adresse de livraison de votre commande est limitée aux pays suivants :

vers le haut